Graham-Stetzer Products
Graham-Stetzer Filters provide Proven Health Benefits In Scientific Studies

A number of companies are now offering products that claim to filter or harmonize EMF energy in a home. Only one product has been tested for the last 10 years and scientifically proven to completely remove what scientists consider to be the most "biologically active EMF energy (4kHz to 100kHz) that rides on a building's electrical wiring, hence reducing a person's exposure to this ubiquitous form of harmful electromagnetic pollution.

Dirty Electricity is a high-powered EMF (electromagnetic field) that is constantly emitted by electrical wiring and electrical devices on contaminated circuits. And because much of this energy is in the radio frequency (RF) range it radiates a dangerous EMF several feet into a room - even when the electricity and electrical devices are not turned on.

Did you know that energy efficient compact fluorescent bulbs operate in the range of 50-100kHz, and laptops 33kHz or more?

Scientific evidence shows that by equipping a home with Graham-Stetzer filters it's possible to alleviate some of the symptoms that are commonly associated with Electrical Hypersensitivity, while at the same time protecting one's self and family from the harmful, cumulative effects of exposure to this dangerous biologically active EMF.

Read compelling testimonials from people just like you who have benefited from the installation or Graham-Stetzer filters in their homes.

Proven effective in well-conducted independent studies at a Canadian University

Read compelling testimonials from people just like you who have benefited from the installation or Graham-Stetzer filters in their homes.

Studies conducted by Canadian scientists strongly suggest that a reduction in the amount of Dirty Electricity in a home can help prevent ongoing exposure and help those who suffer from EHS and a range of other health-related concerns including prominent diseases such as MS, diabetes and tinnitus. Symptoms in children such as ADD/ADHD and asthma in children also improve when dirty electricity is removed from homes and schools.

"Preliminary Results are Absolutely Remarkable"

"People are experiencing better quality sleep and are enjoying higher energy levels during the day. Not only do the Graham-Stetzer filters help people who are electrically sensitive, they are having a positive impact on people with multiple sclerosis and diabetes. More specifically, results from pilot studies show that some people with MS who previously had difficulty walking or were dependent on canes are now walking unassisted and with reduced pain. Diabetics who had the filters installed in their homes have lower fasting blood sugar levels and require less insulin."

Dr. Magda Havas, Professor, Trent University, Environmental and Resource Studies Dept.

Graham-Stetzer filters are designed to simply plug into electrical outlets throughout your home.

To help combat the negative health effects of dirty electricity it's recommended that the average home install approximately 12-20 strategically placed Graham-Stetzer filters. It's best to consult an EMF Consultant who is familiar with the Graham-Stetzer product for best results.

To ensure the effectiveness of Graham-Stetzer filters users should clean up electrical circuits throughout their homes, doubling up where such devices as computers, entertainment centres and printers exist as they are some of the major causes of dirty electricity.

Graham-Stetzer filters fit into a regular home or office electrical outlet, and has been certified by the Canadian Standards Association (CSA) and Underwriter's Laboratory (UL) in the USA as safe for home and office use.

The average home has one computer, 1-2 regular (not plasma or LCD which take more filters) TV sets, a few dimmer switches and little halogen lighting. As there are so many variables in the amount of dirty electricity in the home, each home is somewhat different. The number of filters required for the average home (1100 — 1800 sq ft) is 12 to 20.

Note that one's sensitivity to electromagnetic energy can vary greatly. Experience has shown that for readings on the above 50 on the Stetzer Microsurge Meter (see below) additional filters should be added for maximum results.

Note that one's sensitivity to electromagnetic energy can vary greatly. Experience has shown that for readings on the above 50 on the Stetzer Microsurge Meter (see below) additional filters should be added for maximum results.

INSTALLATION INSTRUCTIONS

The Graham-Stetzer Microsurge Meter measures Dirty Electricity

To install and ensure optimum performance of your GS filters a Graham-Stetzer Microsurge Meter is required. This meter, designed for the Health Ministry in the Republic of Kazakhstan, a former Russian Republic whose government understands the health symptoms associated of dirty electricity and other EMFs and believes in treating the cause of the problem not the patient after they are already sick. The meter measures the amount of high frequency RF energy (the energy that has the ability to radiate from wires and electronic devices) present in a home or buildings electrical system. It displays it in an easy to read digital format.

The meter is calibrated with 30 GS units equivalent to 1.7 KHz, the point at which experts believe electromagnetic frequencies actually penetrate the human body and can cause significant harm.

Meter Reading (GS units) Condition Recommended Action
Less than 20 Ideal Monitor weekly
20 to 30 Acceptable Monitor weekly
31 to 39 Marginal Install additional filters
40 or more Undesirable Install additional filters

To order Graham-Stetzer products call please call our toll free help line at 877 987-5185 or visit our on-line store

The Guaranteed Best Customer Service and Support from the #1 reseller of Graham-Stetzer EMF protection products. To order call 1 877 987-5185.